Greensboro Bat Removal
Stop worrying about bats. Contact our team for bat removal today!
Bat removal is often a necessity for those living around large amounts of water. These eco-systems draw forth mosquitoes and other flying pests and insects. In turn, these regions become very active areas for bats.
If you live or work in one of these sections of the state, you may notice that bats will take up residence in the attic area of your facility. They may also hide behind shutters and window seals.
In these instances, allow us to handle your bat problem and keep them out for good with greensboro bat removal.
While you may find bats to be icky, these creatures play a vital role in our North Carolina eco-system!
Bats have become a common problem throughout much of North Carolina. If you’ve started to notice any of the following factors, be sure to contact our team today! We’ll address your infestation in the most efficient and humane fashion imaginable in the following scenarios:
What many people don’t realize though bat plays an important role in many ecosystems. They help to keep the populations of insects and bugs from getting too high. They also help with pollination, something that the bees and birds are usually given all of the credit for!
There is no mistaking that you are seeing a bat when one surfaces out there. They have a small face and ears. They have long wings that wave outward. They are nocturnal which means that they will be out at night. They are also famous for hanging upside down when they are resting.
There is almost always only one young born at a time. The young are very helpless as their wings aren’t fully developed yet. They rely on milk from their mother to help them grow and thrive until the wings do develop. Once those wings are strong enough for flight, the bats are going to have to find their own food supplies.
The amount of time they spend with their mother depends on the species. It can take only six weeks for the wings to mature on some species. For others though it can take up to four months. The average life span for a bat is 20 years and they tend to have a decent rate or reproduction as long as there is enough food in their environment.
When Bats Come Home
Bats can quickly become a nuisance though depending on where they decide to take up residence. Should you discover you have a problem with bats in your home or business it is best to call in a professional. They can safely remove all of the creatures and their nests. They can also locate the entrance and block it so that the problem won’t repeat itself.
- Bats have taken up residence in your attic
- There are bats in your chimney
- You’ve noticed bat droppings on your house
- Bats have appeared in your vents
- Bats are swarming around your house
- Bats are actually inside your home
Removing Bats from the Attic:
There is little reason to evict bats from buildings where they are not causing a nuisance. However, bats should be prevented from entering human living quarters. This can be accomplished by inspecting the inside of a building for small openings through which bats could enter. All openings connecting the attic or other roosting areas to inside living quarters should be sealed, although entry points on the outside of the building should be left open, allowing bats to exit. Draft-guards should be placed beneath doors to attics; electrical and plumbing holes should be filled with steel wool, caulking or weatherstripping. Bats have small teeth for eating insects; they do not gnaw through wood or other building materials like rodents. Caulking, flashing, screening or insulation can be used to seal most openings on the inside. Expanding urethane foam products should not be used to seal cracks where bats are active, because they can become caught in it. Caulk should also be applied early in the day so that it has time to dry before bats emerge in the evening.
Too Many Cause Problems!
In some instances, noise or odors from large colonies of bats can become a nuisance. When bats must be evicted from a building, netting or tubes that function as one-way valves must be placed over the openings bats use to enter and exit. These one-way valves allow bats to leave, but not reenter the building. Valves may be constructed from lightweight plastic netting (1/6 inch-0.4 cm-or smaller mesh), or plastic pipes or tubes. These exclusion devices should be left in place for five to seven days to ensure all bats have exited. It is not appropriate simply to wait for bats to fly out at night and then seal openings. Not all of the bats leave at the same time, and some bats may remain inside all night. Take weather conditions into consideration when deciding how long to leave the netting or tubes in place; there may be evenings (such as during storms), when no bats exit.
Bats often roost in buildings seasonally, including during maternity periods, and exclusions should not take place until young bats are able to fly. After the young are old enough to fly, all bats can be excluded. The maternity season begins as early as mid-April in the southernmost U.S., mid-June in the northern U.S. and Canada. Young bats are flying and exclusions can resume by late August. In late fall most house-dwellings bats either migrate to warmer climates or enter caves or abandoned mines to hibernate. However, a few species can hibernate in buildings, and in the mildest climates, they may even remain active year-round. If bats are present in cold regions during the winter, exclusions should be postponed until spring when they emerge to feed.
Exclusion is the ONLY effective solution for permanently removing bats from buildings. Trapping and relocating is ineffective since bats have excellent homing instincts and simply return, even when released at great distances. The use of pesticides against bats is illegal and counterproductive. Poisoning greatly increases the likelihood of bats coming into contact with people and pets.
Naphthalene, the active ingredient in moth balls, and ultrasonic devices are often promoted as bat repellents. However, ultrasonic devices are ineffective against bats, and to be effective, naphthalene must be used in such large quantities that it poses a significant health hazard to humans.
Bats sometimes enter buildings through openings on smooth surfaces of exterior walls or through louvers. In such cases, plastic or lightweight, flexible netting with 1/6 inch (0.4 cm) mesh or smaller, should be secured to the building along the top and sides of the opening as shown in the diagram. It should extend 18 to 24 inches (46 to 61 cm) below the bottom edge of the opening and should remain in place for a minimum of five to seven days to ensure all bats have exited. Then, openings should be permanently sealed with silicone caulking, caulk backing rod, hardware cloth, or heavy-duty netting. In some cases, sealing may require repair or replacement of old, deteriorated wood. When bats are using multiple openings to exit and enter, exclusion material should be placed on each opening unless it can be determined with certainty that all areas used by the bats are connected. If so, some openings can be sealed as described above, and netting can be placed over the openings used by the most bats. Even when all roosting areas are connected, bats will sometimes refuse to use alternative exits. In this case, exclusion material must be installed over all exits. After this has been done, watch to make sure the bats are able to exit safely. If they do not appear to be exiting, or appear to be having trouble doing so, make adjustments or add new valves as needed.
There are a number of situations in which tubes work best as bat exclusion devices. Examples include openings used by bats on buildings constructed from materials that do not create smooth exterior walls, such as those found on brick or stone houses, and log cabins. Tubes also work best for holes located at corners where walls meet and on horizontal surfaces such as soffits. Exclusion tubes should have a 2-inch (5 cm) diameter and be approximately 10 inches (25.4 cm) in length. Exclusion devices can be made from PVC pipe or flexible plastic tubing. According to Laura Finn of Fly by Night, Inc., empty caulking tubes work well for this purpose. When using caulking tubes, both ends must be cut out. Use of a flexible plastic tube makes it easy to either squeeze one end of the tube so that it fits into a crevice, or cut one end of the tube into flaps that can be fit over an opening and stapled, nailed, or taped to the building (see diagram). Bats are unable to cling to the smooth surface of these tubes. Do not let the tube project more than 1/4-inch (6 mm) into the opening, ensuring that bats can easily enter the tube to exit. Caulking tubes must be thoroughly cleaned before use to prevent bats from sticking to wet caulk and because dried caulk creates a roughened surface, making it possible for bats to re-enter. Once the tube has been inserted over the hole, a piece of light weight, clear plastic can be taped around the end of the tube that projects to the outside (see diagram) to further reduce the likelihood of bats reentering, though this is typically not necessary.
Plastic sleeves collapse on themselves, preventing bats from reentering once they have crawled out through the tube. After the tube has been inserted into or over the opening used by bats, any spaces between the outer rim of the tube and the building must be sealed shut. Be sure also to seal shut any other openings in the building that bats could use to reenter. Leave the tube in place for a minimum of five to seven days to ensure all bats have exited. After the bats have been excluded, the tube should be removed and the opening permanently sealed.
Call the experts!
If you’d like to schedule service with our certified team, be sure to call 336-365-0564. If you’d like to learn more about these misunderstood creatures, we invite you to browse each of the following links.